Passive Directional Antenna

[ANT241P-PD1] Passive Directional Antenna

Model: ANT241P-PD1$105.00
Write a review

Introduction
  • RF Signal Active Amplifier, Provides Antenna RF Signal Amplification, to Compensate for Long-Distance Signal Attenuation on High-Frequency Connection Cables.
  • Uses Log-Periodic Dipole Element Array, Facing the Required Coverage Area Time Provides Best Reception Quality.
  • Integrated Amplifier Featurewith Gain Setting, Compensate Different Levels of Coaxial Cable Signal Loss.
  • Can Fixed on Microphone Stand, also Can Suspended from Ceiling, or Use Integrated Rotatable Adapter Fixed on Wall.
  • Low-Noise Signal Amplifier Can Compensate Coaxial Cable Insertion Loss.

  • Wireless Receiver and Antenna Distribution System Compatible, Need Receiver Can Provides9~12VDC Bias

    Setup

  • Use Antenna Cable (or Any 50-Ohm Low Loss Coaxial Cable) Will Antenna Connectionto Receiveror Distribution System.
  •  if Cable Relatively Short, Should Lower Low Gain Setting; if Cable Relatively Long Should Upgrade High Gain Setting.
  • Use Time Will Antenna Correct Need Coverage Area.
  • Note: Signal Lossand Cable Quality, Cable Long°Related to.
  • Each Relay Amplifier Can Compensate up to 35Meter Cable Loss.

Parameters
Product NamePassive Pointer Antenna
ModelANT241P-PD1
Impedance450～970MHZ
Antenna Amplification Voltage50Ω
Antenna CH PortBNC
Input Voltage1
Output DC Voltage0
Gain0
Receiving Angle0dB
Mass (Kg)70°
Packaging Weight (Kg)1.7
Packaging Dimensions (Cm)36*33*3.5
Color53*47*9
ColorBlack
MaterialCast Iron

This device does not support OTA upgrades. If a firmware update is needed, please contact your local dealer or email sales@infosvc.biz.

Manual

1_Manual_[CN EN JP SP]_GAODIMIC_(ANT241P)_Antenna_20260226.pdf (1.19 MB)

Other

24_One-Paper-Profile_[CN-EN]_GAODIMIC-(ANT241)_2026.0406.pdf (1.12 MB)

No reviews yet.