[ANT241P-D2] Active Directional Antenna (2025)
Introduction
- Cut-out design, wind-resistant
- RF Signal Active Amplifier, Provides Antenna RF Signal Amplification, to Compensate for Long-Distance Signal Attenuation on High-Frequency Connection Cables.
- Uses Log-Periodic Dipole Element Array, Facing the Required Coverage Area Time Provides Best Reception Quality.
- Integrated Amplifier Featurewith Gain Setting, Compensate Different Levels of Coaxial Cable Signal Loss.
- Can Fixed on Microphone Stand, also Can Suspended from Ceiling, or Use Integrated Rotatable Adapter Fixed on Wall.
- Low-Noise Signal Amplifier Can Compensate Coaxial Cable Insertion Loss.
Wireless Receiver and Antenna Distribution System Compatible, Need Receiver Can Provides9~12VDC Bias
Setup
- Use Antenna Cable (or Any 50-Ohm Low Loss Coaxial Cable) Will Antenna Connectionto Receiveror Distribution System.
- if Cable Relatively Short, Should Lower Low Gain Setting; if Cable Relatively Long Should Upgrade High Gain Setting.
- Use Time Will Antenna Correct Need Coverage Area.
- Note: Signal Lossand Cable Quality, Cable Long°Related to.
- Each Relay Amplifier Can Compensate up to35Meter Cable Loss.
Parameters
| Product Name | Active Pointer Antenna |
| Model | ANT241P-D2 |
| Impedance | 450～970MHZ |
| Antenna Amplification Voltage | 50Ω |
| Antenna CH Port | BNC |
| Input Voltage | 1 |
| Output DC Voltage | -9～12V |
| Gain | 9～12V |
| Receiving Angle | -9～12dB |
| Mass (Kg) | 70° |
| Packaging Weight (Kg) | 36*33*3.5 |
| Packaging Dimensions (Cm) | 1.7 |
| Color | 53*47*9 |
| Color | Black |
| Material | Cast Iron |
Price
$2.00
This device does not support OTA upgrades. If a firmware update is needed, please contact your local dealer or email sales@infosvc.biz.
Manual
Other
No reviews yet.